DIY Pencil Pocket
I love the ceramic Bohin marking pencils. They make a thin, perpetually sharp line that I can see. The line stays on just long enough to quilt or applique through. And, it totally comes out with a light wash or by erasing.
With Bohin refills (6 of each color per pack) I have my choice of white, gray, pink, green, and yellow, depending on the fabric I’m marking.
I’m including a BIC mechanical pencil with each color refill I sell on my web page until I run out.
Here’s how to make Pencil Pocket to keep them all organized. (Click images.)
Step #1: Remove the Pencil Lead
Push the eraser on top of the pencil several times to advance the lead that comes inside the pencil. When you’ve got enough poking out the tip to grab onto, about 1/2″, push the eraser down and hold it down. Yank out the lead. Gently twist off the eraser and dump the other two leads out. Then insert the Bohin ceramic leads from the container. The pencil will hold all 6. Replace the eraser.
Step #2: Cut Fabric
Find two coordinating fabrics, one for the outside of the Pencil Pocket, and one for the inside. (I picked a funky black and a wild pink.) Layer them right sides together. Cut both fabrics at the same time into two 5″ x 5″ squares. They’ll be ready to sew in the next step.
Step #3: Sew
With right sides together and raw edges even (you just cut them like that so they should be perfect) stitch 1/4″ from the raw edges with thread that matches either one fabric or the other. Leave a 3″ opening so that you can turn them right side out. (Backstitch at the beginning and ending to that the stitches won’t come out in the next step.
Step #4: Trim & Turn
Trim all four corners to reduce bulk. You’ll be cutting off a teeny tiny triangle from each corner. Then, reach into the opening and turn the two stitched squares right sides out. Push out the corners with your finger. If there is still fabric stuck in there, take the BIC mechanical pencil, push the eraser down, hold it down, and push whatever lead might be sticking out at the other end up and into the barrel of the pencil. Use the pointy end of the pencil to gently coerce the fabric out. Be careful not to poke the pencil through the fabric. Make sure the sides are fully turned as well. If they’re not popping out, stick a straight pin in the seam and carefully lift them out.
Step #6: Fold Twice
With the opening at the bottom (you’re right, it has not been sewn shut yet) fold the Pencil Pocket in half vertically. Then fold over the upper right corner diagonally until it meets the vertical fold as shown. Press.
Step #8: Sew & Finish
Refold the long vertical fold. Line up the edges along the bottom and right side. With thread that matches the “outside” fabric of the Pencil Pocket, stitch close to the edges, backstitching to secure ends, as shown. The stitching will complete the pocket as it closes the opening.
Now that you know how to make a Pencil Pocket, order your Bohin refills here. They come with the colorful mechanical pencils like you see here.
Entry filed under: Quilting.